AFTvision DLP series machine vision digital light source controller

Overview:

AFTvision DLP series digital light source controller is a digital DC power supply with built-in dual independent control. It provides 12V or 24V DC power digital light source controller required for LED lighting light source. This digital light source controller has three control modes: constant light, double pulse switch and flash frequency. The latter two modes are controlled by external signals.

The light source controller is equipped with an RS-232 interface. You can set the power parameters with the upper PC, and you can also set the parameters with the power panel keypad. The main features of the power supply are independent dual-channel control, high voltage control accuracy, intuitive and simple operation, and it is an ideal dedicated digital light source controller for machine vision LED light sources.

Digital light source controller Digital light source controller

Performance characteristics:

1.Using high-frequency chopping technology to overcome the serious problem of long-term heating of LED light source, with independent multiple outputs and high voltage control accuracy;

2. It has three control modes: constant light, double pulse trigger and flash frequency. The brightness is 256 levels. The latter two modes accept external control signals to control on and off.

3. The power supply is equipped with an RS-232 interface. You can set the power parameters with the upper PC, and you can also set the parameters with the power disk panel.

4, the light source and the camera's flash interface connection or TTL trigger controller connection;

5, can be turned on or off instantly, so that the light source stroboscopically shines, prolong life and increase brightness;

6, 220V AC input 12V DC output; 220V AC input 24V DC output;

7. Strobe time: 0.1ms to 999ms, resolution accuracy is 0.1ms.

Naming instructions:

AFT-

DLP

twenty four

10

-01

T

S

Brand Analog / Digital Output Voltage Output Power Output Channel Trigger Strobe
(AFTvision) (ALP / DLP) (5V, 12V, 24V) (10, 15, 30, etc.) (01, 02, 03, 04) (with / without) (with / without)

Product list and performance parameters:

Specifications

DLP1215-02TS DLP2430-02TS

Input power 100 ~ 240VAC ± 10% (50 / 60HZ)
Output power DC24V / 1.05A DC12V / 1.25A
Output power 15W / 30W
Brightness adjustment control: 255 levels of brightness adjustment
External trigger input TTL high and low active
Trigger response time: less than 0.1ms
External trigger frequency 1 / T (T is the interval time), maximum 3k
Strobe time 0.1 ms to 999 ms
Strobe accuracy: 0.1 millisecond
Trigger output Optocoupler on: low level, pulse output
Communication method RS232 / 485 communication, 9600BPS
Suitable light source Two channels in total: max. 15w / 30w
Operating environment Indoor environment-temperature: 0 ~ 40 ℃
Storage environment Temperature: -20 ℃ ~ 60 ℃
Dimension 40mm * 98mm * 170mm
Weight about 500g
Accessories Power cord, serial communication cable, instruction manual, warranty card, after-sales service card, software CD

Product Dimensions:

DLP series machine vision digital light source controller